Menu
Cart

Conveyor Belt & Rubber & PVC Repair Solutions

  • REMA GOO
  • Eli-Flex Rubber Repair Resin

CONVEYOR BELT REPAIR MATERIAL

REMA GOO is designed to be a high performance conveyor belt repair product that allows you to fix your belt in less than an hour. (Note: repair times are dependent on cure temperatures.)

  • Long Lasting Performance
  • Fast On-Site Repairs
  • Easy to Apply
  • Lower Unit Cost
LONG LASTING PERFORMANCE
  • REMA GOO Flexible Conveyor Belt Repair Material is formulated to last long.
  • REMA GOO is a 100% solids polyurethane formulation which meets VOC regulations. It does not post harden and will remain flexible. It also resists shrinking after application and exhibits good UV resistance.
  • REMA GOO’s flexible formulation reduces the chance of bond failure at edges of repair caused by rounding over conveyor pulleys.
  • REMA GOO cures to a softer 60 (±5) Shore A Durometer which allows the repair to wear at a rate similar to that of the conveyor belt covers.
  • REMA GOO exhibits excellent adhesions to conveyor belt.
FAST ON-SITE REPAIRS
  • The most common types of conveyor belt damage which are cuts, gouges and small holes can be completely repaired with minimal system downtime.
  • No hand mixing of material is required. The REMA GOO is applied by using the REMA GUN Manual Dispenser.
EASY TO APPLY
  • REMA GOO comes in a twin tube cartridge and is dispensed with a heavy duty REMA GUN. Once the damaged area has been prepared and cleaned, just remove the cap, slip the REMA GOO cartridge into the gun, put on the mixing tip and simply fill the repair

 

ELI-FLEX is suitable for repairing holes, tears, splits, rips, gouges, missing filler strips, worn patches, clip joint / fastener sealing, edge repairs, re-building cleats, chevrons and sidewalls, worn drum lagging, roller coatings, friction linings etc.

  • Quick Setting
  • Easy to Use Twin Pack Mixing & Application System
  • No Special Tools or Skills Required
  • Excellent Flexibility
  • High Tear and Impact Resistance
  • High Wear and Abrasion Resistance
  • Broad Spectrum Chemical Protection
  • Flame Retardant and Non-Shrinking
  • Low Irritation Protentional
  • Environmentally Friendly

Features:

Technical Data Sheet

  • Quick Setting
  • Twin Pack Mix and Delivery System for Easy Use
  • Eliminates Spillage and Leakage Through the Gaps in Hinge and Pin Type Clip Joints
  • Protects Fasteners from Damage Caused by Belt Cleaning Blades and Damage to the Blades Themselves
  • Reduces Dust Problems
  • Minimizes Metal-to-Metal Noise

ELI-CHEM RESINS

Off-road tires (quarry vehicles, tractors, diggers, graders, etc.), patch linings (chutes, tanks, pipes, and truck beds), rubber / polyurethane screen decks, rubber castings / moldings, marine fenders, rubber lining, watertight sealing,

vehicle anti-rollbar repair / rebuilding.


ELI-FLEX Conveyor Belt & Rubber Repair Resin

ELI-FLEX Conveyor Belt & Rubber Repair Resin

$ 59.50 Save $ 40.50
PROTEKT-A-SPLICE

PROTEKT-A-SPLICE

$ 130.00 Save $ 65.00